|
Post by ptsrepair on Mar 12, 2003 23:10:27 GMT -5
TEXT I am having a difficult time pulling the sleeves (dry) from my H block. Any tips or tricks would be greatly appreciated. You can email me at dandpthompson@fedteldirect.net. THANK YOU!!!!!!
|
|
|
Post by Mike on Jul 13, 2003 20:31:01 GMT -5
I don' know if this will work but it's worth a try. These sleeves are usually shrunk to be installed. Try packing crushed ice in the cylinder bore around the sleeve puller and let it sit with pressure on it. I have used this in other applications and it worked well. Good luck Mike
|
|